Flowmaster American Thunder Crossmember-Back Exhaust System for 1967-1969 Chevrolet Camaro and Pontiac Firebird
Part # 17201
- H-pipe Crossover for Maximum Power and Deep Tone
- Super 40 Series Mufflers for Deep Powerful Sound
- Mandrel-bent 16-gauge Aluminized Steel Tubing
- Includes Hangers and Hardware for Installation
- Moderate to Aggressive Exterior Exhaust Tone
- Crossmember-Back True Dual Exhaust System
- Does Not Include Header Reducers or Downpipes for Factory Manifolds
- Large Dual 3.00-inch Tubing
Description
This Crossmember-Back American Thunder system is custom designed for high horsepower and large cubic inch engines in 1967-1969 Chevrolet Camaro and Pontiac Firebirds with a V8 engine. It's a true-dual exhaust system featuring all mandrel-bent 3.00-inch aluminized steel tubing with a built-in H-pipe crossover assembly flowing into a pair of large cased Super 40 Series performance mufflers for maximum power and a deep powerful aggressive exhaust note. The large 3.00-inch mandrel-bent tailpipes are custom bent to tuck up high above the rear end and exit with a slight turn down at the quarter panels behind the rear wheels. The system is constructed from aluminized steel and includes all necessary hardware and hangers for installation. Covered by our 3-year Limited Warranty.
Specifications
| CARB (California) Compliant | Yes |
|---|---|
| Catalytic Converter Included | No |
| Catalytic Converter Quantity | 0 |
| Clamping Type | U-Bolt |
| Clamps Included | Yes |
| Drive | 2WD |
| Exhaust Series | American Thunder |
| Exhaust Tip Quantity | 0 |
| Exit Style | Dual Out Rear |
| Finish | Aluminized |
| Gasket Or Seal Included | No |
| Grade Type | Performance |
| Hangers Included | Yes |
| Heat Shield Included | No |
| Inlet Diameter | 3.00 in |
| Inlet Type | Weld-On |
| Main Piping Diameter | 3.00 in |
| Mounting Bracket Included | Yes |
| Muffler (Left) Body Height | 5.00 in |
| Muffler (Left) Body Length | 13.50 in |
| Muffler (Left) Body Width | 10.00 in |
| Muffler (Left) Type | Chambered |
| Muffler (Right) Body Height | 5.00 in |
| Muffler (Right) Body Length | 13.50 in |
| Muffler (Right) Body Width | 10.00 in |
| Muffler (Right) Type | Chambered |
| Muffler Body Material | Aluminized Steel |
| UPC / GTIN | 00700042020454 |
| Warranty | Manufacturer's Limited 3 Year Warranty |
| Year | Make | Model | Submodel | Engine | Note |
|---|---|---|---|---|---|
| 1967 | Chevrolet | Camaro | Base, RS, SS | 5.3L V8, 5.7L V8, 6.5L V8 | X-brace must be shimmed for use on convertibles |
| 1968 | Chevrolet | Camaro | RS, SS | 5.3L V8, 6.5L V8 | X-brace must be shimmed for use on convertibles |
| 1969 | Chevrolet | Camaro | Base, RS, SS | 5.0L V8, 5.3L V8, 5.7L V8, 6.5L V8, 7.0L V8 | X-brace must be shimmed for use on convertibles |
| 1967 | Pontiac | Firebird | 326, 400, Base, HO | 5.3L V8, 6.6L V8 | X-brace must be shimmed for use on convertibles |
| 1968 | Pontiac | Firebird | 350, 400, Base, HO | 5.7L V8, 6.6L V8 | X-brace must be shimmed for use on convertibles |
| 1969 | Pontiac | Firebird | 350, 350 HO, 400, Base, Trans Am | 5.7L V8, 6.6L V8 | X-brace must be shimmed for use on convertibles |
